Relacionar Columnas Microscope MatchingVersión en línea assignment por Benjamin D Morgan 1 The diaphragm that adjusts the amount of light 2 Glass Slide 3 Dependent Variable 4 Revolving nosepiece 5 Grab from here to move the microscope safely 6 how to focus the micoscope on low power 7 This protects the slide so it doesn't fall and break. 8 How to focus the microscope on medium and high power 9 Stage 10 Controlled Variable 11 This should be used to focus under high power. 12 This should ONLY be used under low power magnification/objective. If you use this under high power then you can crack the lens or slide. 13 Independent Variable 14 Objective Lens 15 Cover Slip 16 The eyepiece 17 Body Tube start with the stage at its lowest setting. Make sure the low power lens is being used. Make sure its turned on and light is on. Using the course adjustment knob, slowing raise the base until the picture is in view. Variable that is measured in an experiment. The effect Variable that is changed in an experiment. The cause Use the fine adjustment knob to bring the specimen into focus. If this does not work rotate back out to the low power lens and refocus. Then return to medium/high power. Variable that is kept the same in an experiment that might otherwise effect the results.
Crear