Screwdriver
Used for making round holes or quickly driving fasteners (like screws). It has a "bit."
Nut
A tool with a cutting edge for carving or cutting a hard material such as wood, stone, or metal by hand when struck with a mallet.
A type of fastener with a threaded hole; almost always used with a bolt to fasten multiple parts together.
Hacksaw
Used to fasten materials by digging in and wedging into a material when turned.
A tool used to hold objects securely in place while they are worked on.
A power tool used to smooth surfaces by abrasion with sandpaper.
A saw with small teeth; may cut metal, plastic, or wood; sometimes used by plumbers or electricians.
Used to figure out if something is horizontal to the ground or "straight"
Nail
Chisel
A hand tool used to cut pieces of wood into different shapes.
Power Sander
Phillips Screwdriver
Power Drill
Hammer
Screw
Used to flatten, reduce the thickness of, and create a smooth surface to a rough piece of wood.
Level
Used by hand to install or remove screws. Usually has a handle, shaft, and tip.
Plane
A thin plate with a hole that is normally used to distribute the load of a bolt or nut.
Handsaw
A power tool that uses a toothed blade that spins to cut different materials.
A power tool used to cut fancy edges, patterns, and grooves, and is most often used for cabinetry and decorative woodwork.
Ax
Washer
Vise
A simple hand tool used to drive nails, brads, and other fasteners into softer materials, such as wood or drywall.
Bolt
A hand-operated tool used for turning screws that have a "cross" on the head.
A fastener that is "threaded" and is similar to a screw, but usually has a "nut" to keep it in place.
Circular Saw
A tool used to split wood. It has a head and handle (called a "haft").
Router
A slender metal shaft that is pointed at one end and flattened at the other end and is used for fastening one or more objects to each other.