1
It is generally a simple cast iron or stainless steel unit which collect engine exhaust gas from multiple cylinders and deliver it to the exhaust pipe.
2
This manifold controls the flow of the air/gas mixture into the engine.
3
This engine part connects the piston to the crankshaft.
4
They are used for delivering electric current from an ignition system to the combustion chamber of a spark-ignition engine to ignite the compressed fuel/air mixture by an electric spark, while containing combustion pressure within the engine.
5
This component is responsible for the proper operation of the engine and converting a linear motion to a rotational motion.
6
They are typically in between the pushrod and the intake and exhaust valves. They allow the pushrods to push up on the rocker arms and therefore push down on the valves.
7
It is a shaft with a cam or cams on it.
8
The space in which a piston travels, it is considered as the core of the engine.
9
They are designed to open and close at precise moments, to let in air and fuel and to let out exhaust, to allow the engine to run efficiently at all speeds.
10
They provide a sliding seal between the outer edge of the piston and the inner edge of the cylinder.
